“I was looking for a way to get all my students pedaling at once and was making something like this for myself – but decided to go with yours because you’ve been at it for so long. I decided to get it done right.”
Convert, store and distribute electricity for your pedal power events. One, two , three go! Unbuckle the lid, plug in your bikes and devices and start your show.
An Extraordinary Box
When we first started producing pedal power events, we had lots of devices daisy chained together to do all the work of monitoring power production and consumption, smoothing out the load demands, handling AC and DC, letting pedalers know whether to pedal more or less, and more. We realized we needed one tidy box that would do it all, and that’s what we’ve designed the Utility Box to be.
It’s engaging, too—the built-in ultracapacitors store a finite amount of energy, and an outage is always a possibility that your coach [LINK] will address by making sure people pedal. Pedalers, in turn, get a feel for supplying energy to a key device that’s only working because they’re pedaling.
The common hassles of a DIY system—broken fuses, ruined batteries, fried circuits, devices turning on and off a lot because you didn’t have the right specs—aren’t a problem when you get the festival-proven Utility Box.
If you’re a believer in people power, consider team activities such as the ones the Utility Box supports best. They get people working together to power an emotionally rewarding light show, a rockin’ concert, a recharging station at a convention, or tools for building or cooking.
What’s the advantage to having more pedalers?
Besides the obvious advantage of having more overall power available when you add more generators, you will have better results avoiding interruptions and keeping devices on when add more riders and distribute the load.
How many pedalers will I need for my activity?
The short answer is that if you’re expecting mainly adults at your event, you can guestimate that you’ll be producing about 60 watts per bike. Divide the rated power consumption of your device(s) by 60 to get the number of bikes you’ll need. Or, get scientific with it.
How does it feel to “charge” the Utility Box?
It feels hard at first because the capacitor is low and will take all the energy you can give it, but in the correct range it feels like biking down the street. For a highly consumptive device, it will feel like you have to climb up a hill – you feel it in your body when you have extra-demanding devices. You can challenge, educate, and entertain your audience by varying the number of pedalers, the volume of the music, the number of lightbulbs, etc.
What is the precise DC voltage output?
The DC output is 22–27V. Perfect for nominal 24v devices.
- Sets up in one minute – works right out of the box
- (5) pedal power inputs (expandable to 10 with a junction box) accept any of our generators, such as the Roll Up, Electric Fender Blender Pro or Generator Pro
- Built-in mini Pedalometer (or upgrade to a wattage display) shows riders how they’re working together to meet power demands
- (2) 110V AC outlets (just add a power strip for more devices)
- (2) 24V DC outlets for external devices such as LED Stage Lighting Panels
- Sufficient for a concert audience of 500-1,000 people (using Modified JBL speakers)
- 800-watt Pure Sine inverter is perfect for the demands of sensitive audio equipment (higher capacity inverter available by request)
- All wiring sits safely under a clear polycarbonate window that lets you show people how the system works
- Ultracapacitor feels good to pedal into and easily handles spiky loads like concerts and provides a 2–5 minute buffer of power (depending on consumption levels)
- Over-voltage protection for when the pedalers are producing more than the devices are consuming
- Durable Neutrik twist-lock connectors — the gold standard in the event audio world. Yanked cables don’t disconnect.
- Compatible with the Pedalometer
Starting at $1,975
2 YEAR WARRANTY
90 DAY RETURN POLICY
NO RESTOCK FEE
LONG SERVICE LIFE
ON THE MARKET SINCE 2009